
Cheatsheet
Everything you need to learn off-road RC racing, on one piece of paper. From roll center to camber gain to axle height, learn what your RC car's settings do, how to set up your car for low or high grip, and how to troubleshoot common setup problems.
Download Free
Setup guide
7 RC Setup Changes for High Grip vs Low Grip Tracks
The Hall Bros are back on the couch again, this time explaining the primary setup changes you'll want to make when going between high grip and low grip tracks. It focuses on their specialty, 1/10th scale, but most recommendations will work on 1/8th as well.

Setup guide
Suspension Tuning with Rear Pill Inserts
Associated team driver Aydin Horne walks us through the basics of using the rear suspension pins and pill inserts to adjust your toe, anti-squat, and roll center to fully lock in your car's handling!

Setup guide
Adam Drake Explains Ackermann
The Drake covers one of the more mysterious aspects of steering tuning, so you'll know exactly how to use it to get your car running right.

Setup guide
How to Use a Setup Station with Buggies
Mayako/Invisible Speed ace Pekko Iivonen walks us through how to use a setup station properly.

Setup guide
RC Off-road Droop Tuning
Drake on droop! How to set it properly on your 1/8 off-roader, so you get consistent, meaningful readings you can use to tune your car's handling.

Setup guide
RC Shock Rebound and Compression Tuning
The Hall Bros are back, this time explaining how to tune your shock damping both in compression and rebound, a must-watch for racers who want to be ready for any and all track conditions!

Setup guide
Beginner's Guide to Lipo Batteries for RC
RC Vitals put together a great video in interview format with everything you need to know about LiPos. It's long, but covers a LOT of ground, and is perfect for someone getting into the hobby!

Setup guide
How Anti-roll Bars Affect Handling in RC Cars
The Hall Brothers are back with a deep dive on anti-roll bars and how they help the handling of off-road RC cars. As usual, a must-watch from them!

Setup guide
Moving the Entire Camber Link on Off-road Cars
The Hall Bros explore a topic rarely covered - what happens when you move the entire camber link (inside and outside positions) either up or down, or inside-outside? How does the handling change?

Setup guide
1/8 Scale Buggy Foam Tire Insert Preparation
by AKA

Setup guide
Gluing 1/8 Foam Tire Inserts to the Wheel
by Adam Drake

Setup guide
Gluing Touring Car Tires for Use on Carpet
by Eric Anderson

Setup guide
How to Balance Off-road RC Car Tires
by JConcepts

Setup guide
How to Balance Off-road RC Tires
by Adam Drake

Setup guide
How to Glue Tire Sidewalls with Alex Hagberg
by Alex Hagberg

Setup guide
How to Prep Off-Road RC Tires
by Ryan Harris

Maintenance guide
How to Replace Tire Inserts with Klinik RC
by Klinik RC

Setup guide
Off-Road Tire Mounting and Gluing with Jason Ruona of JConcepts
by JConcepts

Setup guide
Off-road Tire Gluing and Balancing by VP-Pro
by RC Trophy Chasers

Setup guide
RC Off-Road Tire Prep by Ryan Stiles Harris
by Ryan Stiles Harris

Setup guide
RC Off-road Tire Deep Dive with the Hall Bros
by The Hall Bros

Setup guide
Spencer Rivkin on Tire Mounting
by Spencer Rivkin

Setup guide
Touring Car Tire Prep with Jilles Groskamp of Inf1nity
by Inf1nity

Reference
Using Slick Tires on Off-road RC Cars
by JConcepts

Setup guide
V-Cutting Tire Inserts & Insert Selection for 1/10 Off-Road Racing